Guide

SPRI Rooftop Equipment Securement Standard: What Roofers Do

SPRI's new rooftop equipment securement standard sets test and performance criteria for low-slope equipment attachments. Here's how roofers should prepare.

By Toby Karamoutchev

· 3 min read

Gray slate-style tiled roof with a white stone dormer window and a blue window pane under a clear blue sky, for a guide on rooftop equipment securement standard for roofers

SPRI, the association representing sheet membrane and component suppliers to the commercial roofing industry, has announced it is establishing a standard for rooftop equipment securement on low-slope roofs. The standard will set test methods and performance criteria for how equipment is attached. For now it is still in development, so the practical step is to start documenting attachment details on your low-slope jobs so you can price and specify them consistently once requirements are published.

What to do about the SPRI rooftop equipment securement standard now

SPRI's announcement says the new standard will cover static and cyclic loading, environmental exposure, corrosion resistance and water-tightness of the assemblies that hold equipment in place, according to Roofing Magazine's report on the announcement. [Roofing Contractor's coverage](https://www.roofingcontractor.

That gap matters on every rooftop HVAC, solar or antenna job you bid. Until a standard exists, the way an attachment is specified depends heavily on the engineer, the manufacturer and the owner.

Why this matters for low-slope jobs

Low-slope roofs are where equipment attachment decisions are most often made by habit. According to Roofing Magazine's report, the standard will give designers, contractors, manufacturers and code officials consistent criteria for specification, testing and acceptance.

What the standard is meant to cover

The stated aim is to assess structural capacity, environmental durability, corrosion resistance and weather-tightness of the assemblies used to secure roof-mounted equipment. Those are the four things a roofer should already be asking about on any attachment, whether or not a standard exists.

Load, durability and water-tightness criteria

SPRI's white paper on rooftop equipment attachment groups the traditional methods, including self-ballasted and ballast systems and adhered attachments, and notes their limits. Ballast relies on weight and friction and has low load resistance for lightweight equipment, and ballast materials may not last as long as the roof. Adhered attachments depend on adhesive durability, which may not match the roof's service life. The SPRI white paper on rooftop equipment attachment is worth reading in full before your next large unit.

Keep your own bids general on load values. Do not quote test numbers until the standard publishes them.

How securement affects your quotes and scope

Before you price an attachment, collect the basics: equipment weight, mounting type and the roof membrane system. The same white paper lists what to determine on any project, including code, wind and seismic loads, the existing roof system, the roof warranty terms and membrane compatibility.

  • Flag any attachment method that no published standard covers as a scope item needing owner or engineer sign-off.
  • Note in the proposal that requirements are still being developed and may change.
  • Check warranty terms with the manufacturer before the attachment goes on.

Where SPRI's other standards fit

SPRI is working on several related documents. It announced plans to revise ED-1, the design standard for edge systems used with low-slope roofing, and it released a 2025 revision of RD-1, the performance standard for retrofit drains, per [Building Enclosure's roofing codes page](https://www.buildingenclosureonline.Edge and drain details often sit on the same roof as rooftop equipment, so one spec review can cover several items.

A short checklist for this week

  1. Pull your last three rooftop equipment jobs and record the attachment method and membrane type for each.
  2. Ask your membrane supplier which SPRI standards apply to their products and whether any cover equipment attachment.
  3. Add a line to your quote template for engineer review on large or unusual equipment.
  4. Create a standard attachment section in your estimate so each equipment line item has the same fields filled in.

Related reading: roofing quote software that builds the estimate from your price list and first 5 minutes after an online roofing quote request.

Next step

Building a consistent attachment section is easier when your quote software pulls line items from one price list. Vertically's quote pricing is custom to your labor rates, fixed costs, materials and markups, and it is free for 30 days with no contract or credit card. Book a free systems audit to see how it would fit your current process.

Frequently asked questions

What is the SPRI rooftop equipment securement standard?

SPRI, the association representing sheet membrane and component suppliers to the commercial roofing industry, is establishing a standard that will set test methods and performance criteria for rooftop equipment securement systems on low-slope roofs. It is still in development and has not been published yet. It will cover loading, environmental exposure, corrosion resistance and water-tightness.

Does this standard apply to all roofs?

The announced scope is rooftop equipment securement systems installed on low-slope roof assemblies. Steep-slope roofs and other attachment situations are not described in the announcements. Confirm the final scope when SPRI publishes it.

Do I need to change how I quote rooftop HVAC work now?

You do not need to change pricing rules yet, but you should collect equipment weight, mounting type and membrane details before quoting. Flag any attachment method that lacks a published standard for owner or engineer sign-off. Note in the proposal that requirements may change.

Who can take part in the SPRI canvass process?

SPRI has invited interested parties to participate in the canvass process by contacting the association at info@spri.org. The announcements do not list eligibility requirements, so reach out directly for details.

Answer every lead in under 30 seconds.

Vertically replies to your leads, sends the quote, calls them, and books the inspection on your Google Calendar. Free for 30 days. No contract, no credit card.

Every lead you don't answer today is a job for someone else.

Let Vertically reply to them for you. Free for 30 days.

No contract. No credit card. We only work with one roofer per area.