Roofing Price Book Template Per Square: What to Compare
Compare roofing price book templates priced per square. See what line items to include, what to check, and when to switch to quote software.
By Toby Karamoutchev
· 6 min read

On this page
Most roofing quotes are built by the square, so a price book that prices per square is the right starting point for a roofing price book template. The harder question is which template to use and what it needs to handle. This guide compares the common free formats, lists the line items a per-square book should carry, and shows where a spreadsheet stops being enough.
Disclosure: Vertically, which publishes this blog, is the author's product and is mentioned once near the end.
Why roofers price by the square
A square is 100 square feet of roof surface. It is the unit most roofing estimates use, and it covers the main quantities on a job: shingles, underlayment and labor for tear-off and installation are all typically priced against it. A free roofing estimate template from InvoiceSonic shows the approach: a 24-square re-roof is priced line by line, with the total landing at about $607 per square including tear-off and disposal.
Generic quantity and unit-price quoting does not map cleanly to roofing work. A roof has pitch, layers, valleys and penetrations, and a single flat quantity column hides those differences. A template built around squares keeps the labor and materials visible, which makes it easier to explain a price to a homeowner and easier to correct the next time you bid.
What a square means for your numbers
Measure the roof in squares, then decide how you will handle waste. A roofing quote template for Excel from Tabletemplates recommends adding a waste factor of 10 to 15 percent on top of measured squares for cuts, overlaps and irregular shapes. Put that factor in the estimate so the reader can see how you got the shingle count.
What a roofing price book template per square should include
A usable per-square book covers the whole job, not only the shingles. At minimum, check that it includes these groups.
Tear-off and disposal lines
Price tear-off per square and state the number of layers coming off. A Staxen roofing estimate template lists tear-off labor by the square and says to state the number of layers. A second layer adds labor and dump weight, so it should be its own line or a clear note.
Decking should be a separate per-sheet line. You cannot see rot until tear-off. The same Staxen template recommends carrying a per-sheet replacement price for decking found rotted at tear-off, set before the job starts. Set that number in your book now, so you are not negotiating it on the roof.
Dumpster and disposal belong in the book too, with the size, haul fee and any per-ton overage stated.
Materials with waste and markup
Keep each material on its own line: synthetic underlayment, ice and water shield, starter, drip edge, step and valley flashing, pipe boots, ridge vent and box vents. Ice and water shield is often priced by the linear foot at eaves and valleys, while underlayment is priced by the square.
Show a markup on materials separately from labor. The Tabletemplates template applies markup to the materials section only and prices labor directly at your rate per square. That separation makes it clear what you are charging for product and what you are charging for installation.
Comparing free templates: Excel, Word and PDF
Free templates come in three main formats, and each does a different job.
- Excel and Google Sheets templates handle the math. They calculate area, waste, markup, tax and deposit from the inputs you type. The Tabletemplates file is one example, and it adds a Quote Register to log each quote.
- Word templates are good for a single clean document. You can edit the text and layout easily, but the totals are not calculated for you unless you add them.
- PDF templates are fillable forms. They work for a one-off estimate you print or send, but they do not calculate or store anything.
What the free templates handle well
Spreadsheet templates are strong on arithmetic and consistency. Once your rates are in place, every estimate uses the same unit prices, the subtotal and tax add up correctly, and you can swap a material cost in one cell. Word and PDF formats are fine when you want a clean, branded document and have few quotes to send.
Where they fall short
Templates rarely track what happens after the quote goes out. Win rate, lead status and follow-up are not built in unless you add them yourself. The Tabletemplates Quote Register is an exception, and it is still a manual log. Word and PDF files do not track anything. Keeping your price list current across several files is also manual, so a rate change can leave older quotes using outdated numbers.
Setting up your own per square prices
Start with your labor rate per square, then add materials with a stated markup. Work out what a complete re-roof costs you to do, including crew time, tear-off, disposal and overhead, and divide that across your squares to get a labor rate. Then price materials at cost plus the markup you choose, and check the total against jobs you have already completed.
Review per-sheet decking and per-piece items each season. Prices for OSB, shingles and flashing change, and a stale number can cost you on the next job. Put the review date on the book so it is clear when rates were last checked.
Keep warranty terms and exclusions on the estimate itself. A price is only clear when the homeowner knows what is included, such as the number of layers, whether decking is billed at actual, and what the manufacturer warranty covers. The Summit Ridge sample estimate on Invoicefy lists exclusions and a 30-day validity window next to the total, which is a useful pattern to copy.
When a template stops being enough
A template works while the volume is small and the prices change rarely. It starts to strain when you send many quotes at once, lose track of which ones are still open, or change your price list often and need every new quote to pick up the new numbers. At that point the work of copying rates between files and chasing open quotes takes real time.
For more on what estimate software does and how to evaluate it, see Roofing Estimate Software: What It Does and What to Check.
Signs you need estimate software
- You send many quotes and cannot easily see which are open.
- Your price list changes often and you want quotes to rebuild from it automatically.
- You want the customer to receive the estimate by email with your branding and a clear next step.
Roofing quote software that builds the estimate from your price list is one way to handle this. Vertically, the author's product, builds the estimate on your website from your own labor rates and materials. Smaller jobs get an instant quote, and an AI call goes out about 5 minutes after the request to book an inspection. Larger jobs above your set ceiling get a note that more information is needed. For how this works with your own prices, see Roofing Quote Software With Your Own Price List.
What to do this week
Pick one template and load your three most common roof types as per-square examples, such as a simple gable, a hip roof and a re-roof with two layers. Run one quote end to end, from measurement and waste to the total and deposit, and check it against a job you finished recently.
Then write down your tear-off, decking and disposal rates on paper before the next estimate. Date them, and set a reminder to review them at the start of each season. A book you trust is worth more than a fancy template, and those rates are the part you cannot quote without.
If you want to see how a quote built from your own price list looks in practice, book a free systems audit and Vertically will walk through how the estimate, email and follow-up would run on your website, with a 30-day free trial and no contract or credit card.
Frequently asked questions
What is a square in roofing?
A square is 100 square feet of roof surface. It is the standard unit for pricing shingles, underlayment and labor on a roofing job, and roofers usually add a waste factor of 10 to 15 percent on top of the measured squares for cuts and irregular roof shapes.
Should my price book be per square or per foot?
Most roofing quotes are built per square for the main materials and labor, with items like drip edge, ridge vent and ice and water shield priced per linear foot, and pipe boots and flashing priced each. A per-square book that also has per-foot and per-piece lines covers the full job without forcing everything into one unit.
Are free roofing estimate templates accurate enough to use?
Free templates give you a structure and the math, but the accuracy depends on the rates you enter. Check that the template prices tear-off, decking per sheet, underlayment, flashing and disposal, and then fill in your own labor rates and material costs before you send any estimate.
How often should I update my per square prices?
Review your per-square and per-sheet prices at least once a season, and sooner when material costs change noticeably. Put a review date on the price book so you know when the rates were last checked.
When should I move from a spreadsheet to quote software?
Consider quote software when you send many quotes and lose track of which are open, when your price list changes often, or when you want quotes sent automatically with your branding and a clear next step. A spreadsheet is usually enough while volume is low and prices change rarely.
Answer every lead in under 30 seconds.
Vertically replies to your leads, sends the quote, calls them, and books the inspection on your Google Calendar. Free for 30 days. No contract, no credit card.
Keep reading
- GuideRoofing Estimate Software: What It Does and What to CheckLearn what roofing estimate software does, how it builds a quote from your own prices, and what to check before you choose a roofing estimate software tool.Read more
- GuideRoofing Quote Software With Your Own Price ListSee how roofing quote software with your own price list keeps instant estimates accurate, and why a ceiling for big jobs protects your margins.Read more

